The terms HDMI® and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. *Please note that keeping the iBOX 1100 Series in a vertical position will ensure better cooling performance. The iBOX 1100 Series can be placed in vertical or horizontal positions. Mount the iBOX 1100 Series by sliding it into place.*Choose mounting holes depending on the mounting hole pattern of your LCD screen (75 mm × 75 mm or 100 mm × 100 mm). Attach the VESA Bracket to the rear of a compatible display using the four screws.Attach the two screws to the base of the iBOX 1100 Series.For dual channel conguration, you always need to install identical (the same brand, speed, size, and chip-type) DDR4 SO-DIMM pairs.The iBOX 1100 Series requires DDR4 SO-DIMM (1.2V).Push down until the modules snap into place.Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.SO-DIMM Slots: How to Install the Memory Modules (DDR4 Low Voltage (1.2V)) If you install the 2.5” HDD, please keep the iBOX 1100 Series in a vertical position to ensure better cooling performance. *For the iBOX 1100 Series, it is not recommended to install a 2.5” HDD. Connect the SATA Cable to the connector.Connect the SATA Data and Power Cable to the HDD.Attach the HDD cage to the bottom panel and secure it using the four screws.Then lift up and remove the bottom panel. Remove the four screws on the bottom case.2.5-inch Hard Drive: How to Install the Hard Drive Release the screw and remove the bracket from the motherboard.Release the screw and carefully remove the M.2 SSD (Type 2280).Bracket: How to Remove the M.2 SSD (Type 2280) and the Bracket Tighten the screw to secure the M.2 SSD to the motherboard.Carefully insert the M.2 SSD into the slot.Cables and power adapter of top-notch quality are included. This product has powerful hardware part that is built into a sturdy aluminum box. It is developed according to the latest needs and trends. Locate the M.2 slot on the motherboard. Z3X Pandora Tool is a powerful instrument for working with many phones and tablets based on Mediatek chipsets. Tighten the screw to secure the WiFi Module to the motherboard.Carefully insert the WiFi Module into the slot. This DisplayPort only supports DP to D-Sub dongle and does not support DP to.Locate the WiFi Module slot on the motherboard.WiFi Module: How to Install the WiFi Module (Optional) This DisplayPort only supports DP to D-Sub dongle and does not support DP to HDMI dongle and DP to DVI dongle. *To use DisplayPort as a display output, please connect your monitor/display to HDMI Port when installing the OS system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |